You are viewing the "Small Business" Archives

ARC Announces COVID-19 Grants for Lenders Helping Small Businesses
By: Emily Allen | WVPB
Posted on:
WASHINGTON, D.C. (WVPB) — The Appalachian Regional Commission has announced $3.75 million for banks and other lenders who have lost money during this global coronavirus pandemic. Specifically, the grants are for lenders who work with small or local businesses and nonprofits in the ARC’s 13-state coverage area. In a press release on Monday, the commission stated the… Read More

Loopholes In Small Business Relief Program Allow Thriving Companies To Cash In
By: Cheryl W. Thompson | Graham Smith | NPR
Posted on:
The Paycheck Protection Program is designed to help small businesses from falling off a cliff during the pandemic, but some companies on firm ground have gotten millions to expand.

Small Business Emergency Relief Program Hits $349 Billion Cap in Less Than 2 Weeks
By: Danielle Kurtzleben | NPR
Posted on:
The Paycheck Protection Program opened on April 3, and it was plagued with delays and technical difficulties from the start.

Ohio Offers Appalachian Businesses Loan Help During COVID-19 Disruption
By: Allison Hunter
Posted on:
NELSONVILLE, Ohio (WOUB) — Small businesses in Ohio’s Appalachian counties may receive help offsetting losses due to the state’s attempts to slow the spread of COVID-19. JobsOhio is infusing Appalachian Growth Capital, LLC (AGC) with $2 million to secure loans for companies in eastern and southern Ohio. According to a press release, AGC is a… Read More

Ladies’ Intro to Welding
This ladies-only class has the laid back feel of a girls’ night out. Participants are encouraged to learn from each other as well as the instructor. Participants will learn different MIG weld techniques and basic troubleshooting of common welding problems. Participants should wear close-toed shoes, denim pants, and long sleeves. Hair should be pulled back…. Read More

Open Metal Shop Hours
Open shop class is a time for members who have gone through the metal shop orientation to come and work on their own projects with a metal shop instructor present. It is perfect for those who are not very familiar with the tools or have only used them during orientation. New members are strongly encouraged… Read More

Open Metal Shop Hours
Open shop class is a time for members who have gone through the metal shop orientation to come and work on their own projects with a metal shop instructor present. It is perfect for those who are not very familiar with the tools or have only used them during orientation. New members are strongly encouraged… Read More

Intro to MIG Welding
This class is for anyone [18 and older] who wants to learn how to weld! In this class participants will learn different MIG weld techniques and basic troubleshooting of common welding problems. Participants are encouraged to learn from each other as well as the instructor. Participants should wear close-toed shoes, denim pants, and long sleeves…. Read More

Open Metal Shop Hours
Open shop class is a time for members who have gone through the metal shop orientation to come and work on their own projects with a metal shop instructor present. It is perfect for those who are not very familiar with the tools or have only used them during orientation. New members are strongly encouraged… Read More

Ladies’ Intro to Welding
This ladies-only class has the laid back feel of a girls’ night out. Participants are encouraged to learn from each other as well as the instructor. Participants will learn different MIG weld techniques and basic troubleshooting of common welding problems. Participants should wear close-toed shoes, denim pants, and long sleeves. Hair should be pulled back…. Read More

Open Metal Shop Hours
Open shop class is a time for members who have gone through the metal shop orientation to come and work on their own projects with a metal shop instructor present. It is perfect for those who are not very familiar with the tools or have only used them during orientation. New members are strongly encouraged… Read More

How to build a comfortable 2×4 bench
Are you looking for a way to get into woodworking? Need a comfy bench but would rather make than buy? Come on out to this basic woodshop class at Athens Makerspace. In this class you will learn how to make repeated cuts to the specified dimensions and safe operation of woodshop power tools. You will… Read More

DIY Dog Beds and Toys
On February 1st, 2020, Athens Ohio MakerSpace and Friends of the Shelter Dogs will be hosting a class on how to create dog beds of any size out of reusable fabric and scraps! If you wish to make a dog bed, be sure to register for the class in advance at https://test.athensohiomakerspace.com/classes/ Dog beds are… Read More

Weld a Biochar Kiln
Want to learn about making your own kiln for biochar? We will start the class by talking a little bit about what biochar is and how the kiln works. We will spend the rest of the class practicing the skills you will need to make one: cutting metal and welding. You will not each leave… Read More

Intermediate Sewing Part I – Apron
The first in a 2-part series for participants who have taken Beginning Sewing or have other basic sewing skills to take on the next step and develop their sewing finesse – while making a beautiful work apron! In this friendly 3-hour class, students will learn skills to create pockets and use bias tape as a… Read More

January Pod Meetup
In case you hadn’t heard, in May 2019 we launched a Morsbag ‘Pod’ at Athens Makerspace. What is a Morsbag, you ask? An international movement known as Morsbags has formed ‘pods’ of sewists all over the world who meet up to sociably upcycle fabrics into reusable bags that are then given away for FREE! At… Read More

Basic Electronics
The first in a series, in this class participants will learn about the most common components: • Resistors • Capacitors • LEDs • Transistors • Inductors • Integrated Circuits This will include how they are used in a circuit, and shown put in use on a breadboard. Participants will also learn how to Use Ohms… Read More

Intro to Vintage Sewing Machine Restoration
Intro to Vintage Sewing Machine Restoration will explore the history and mechanics of sewing machines and include a hands-on demonstration of cleaning and adjusting a single machine. This on-going event will feature a different model machine each time it is offered. Attendees do not need to attend classes in a set order. Check back to… Read More

Beginning Sewing
Always wanted to learn how to sew? Come learn at Athens Makerspace in this friendly 3-hour class! This class is suitable for those who have never sewn anything, but when you leave, you will have the skills to take on more advanced projects, such as in our Intermediate Sewing Part I – Apron class. Students… Read More

Intro to Welding
This class is for anyone [18 and older] who wants to learn how to weld! In this class participants will learn different MIG weld techniques and basic troubleshooting of common welding problems. Participants are encouraged to learn from each other as well as the instructor. Participants should wear close-toed shoes, denim pants, and long sleeves…. Read More

ReUse on Union December Open House
Come on out to our holiday Open House 12-5 Saturday, December 21st! We will be featuring all our consignment artists’ talent. Many will be in attendance, and will have brought in lots of new goodies to peruse – come enjoy refreshments and shop for locally made gifts! Live music on site – stay tuned for… Read More

Last Minute Gifts and Gift Bags!
Need wrappings for that gift, or haven’t yet found something for the people on your list? Come to our drop-in time at Athens Makerspace and whip up a lovely reusable gift bag or choose from our array of sewn project ideas for practical last-minute handmade gifts. These include homemade produce bags, napkins, pot scrubbers, placemat/utensil… Read More

Make Your Own Upcycled Holiday Stocking
Come learn how to craft your very own Upcycled Holiday Stocking – just in time to use it this December or give as a thoughtful handmade gift to a special person! In this 3 hour class, participants will learn how to create a fully-lined, one-of-a-kind stocking [with a secret pocket, for extra special gifts!] out… Read More

Aluminum Can Cutting and Upcycling!
Are you amused by the big upcycled windchime by Dan Laurence at ReUse on Union? Come learn how to make one for yourself! In this introductory class, Dan will show you all his best tricks for efficiently cutting common aluminum beverage cans to best utilize their bottoms, sides, and unique design elements. Students will then… Read More

Patterned Cutting Board Workshop
Make your very own patterned cutting board to keep or give in this popular workshop. No woodworking experience necessary! Participants will create their own custom designs and be able to take home 1-3 cutting boards! Athens Makerspace will provide a variety of attractive hardwoods already planed and cut into strips, including walnut, oak, cherry, ash,… Read More